With 4.5" (CF63) Flanges
The MC-series of XY translators combine extremely high rigidity, a large working bore and affordable cost.
They are available in both ± 1.0 (± 25 mm) and ± 0.5" (± 12.5 mm) travel, circular pattern, with both manual and stepper motorized versions. In fact, conversion from micrometers to stepper motors can be done in 15 minutes at the user's site.
The entire MC-series ranges in size from the very large MC3000, through the MC2000 and the MC1500 shown here, to the compact MC1000. They have features not found on translators available elsewhere. These include ±2° tilt adjustment on the top flange, and the ability to mount the X-axis micrometer (or motor) on either side, which are standard
Expandable
One distinct advantage of the MC1500 is the cost savings when long Z Axis strokes are required. Since only the bellows in the XY portion needs to be larger than the probe, the user can extend the Z Axis stroke using a smaller diameter (less costly) bellows that just clears the probe running through it. Simply select the model below that best suits your needs.
For horizontal mounting, i.e., with the flange faces vertical, dual constant force counterbalance springs are available that compensate for gravitational loads. If required, this feature can be added in the field, after the user accurately determines the weight of the devices to be mounted.
To make your selection, add the total travel required in either the X or Y axis to the maximum diameter of the device that will pass through the translator. This sum determines the minimum bellows inside diameter (ID).
Next, select the bottom flange that best mates to your chamber or other equipment. While the most common size is 4.5" OD (CF63), either tapped or non-tapped flange sizes of 6" (CF100), 8" (CF150) and larger are available. Consult the factory for more information.
Now you are ready to select a Z axis translator that best mates to the device to be manipulated, to complete your XYZ sample manipulator.